Interested in Dermal Fillers? Upload your picture to see how you'll look after your procedure

Drag Conveyors

HomeProductsDrag Conveyors

Our product line for drag conveyors include Hi Roller, York, Union Iron and Lambton Conveyor to fit a variety of applications.

York Incline Drag Conveyors

Featuring two available configurations : Straight Incline (ID) or Curved Section Incline (IDC)

Range of capacities from 1,000 BPH to 25,000 BPH, range of incline up to 45 degrees on both models, IDC elbow available in 5-degree increments, 8-gauge divider floor standard to separate lower flow side from upper paddle return side, by-pass inlets feed directly into the flow side, galvanized construction with some weldment components provided powder coated, AR bottoms and side liners available, heavy duty flame-cut sprockets.

Split sprockets used on high-capacity units, heavy duty roller chain and welded engineering class chain designed to size and capacity with full compartment size UHMW flights, bolt-together construction for ease of maintenance and proper alignment, hemmed covers provide strength and ensure a good moisture seal and large receiving hoppers available with drive way grate.

Union Iron Agricultural En-mass Drag Conveyor

Featuring hardened tooth sprockets, all pillow block bearings, shafts sized to application, UHMW seals, 1 intermediate inlet and 1 head discharge, screw type take-ups, 11 GA steel construction, 10 GA removable bottoms, heavy welded steel conveyor chain, inspection doors on head and tail sections, cover lipped for excellent seal, cover may be flat or hipped design with quick screw clamps or bolted on, heavy welded steel conveyor chain with welded attachments and 3/8″ – 5/8″ UHMW flights assembled and placed in intermediate sections.

Drives sized for application and mounted to head section, drag Leg attachment plates (1 set per 10′ of conveyor length), paint: 1 coat primer, 1 coat finish industrial grade enamel applied to all exposed steel surfaces and optional accessories like A.R. steel bottom and side liners From 10 GA – 1/2″, bend sections / incline conveyors, split sprockets, hold-down return rails or split-pan design for inclined conveyors, limit switches and drive over pass conveyor line option. Available 12-21 series.

York En-masse Conveyors

They feature a range of capacities from 1,000 BPH to 25,000 BPH, maintain capacity up to a 5-degree incline, galvanized construction on all standard units, AR bottoms and side liners are available, heavy duty flame-cut sprockets.

Split sprockets used on high-capacity units, heavy duty roller chain and welded engineering class chain designed to size and capacity of conveyor with UHMW flights, bolt-together construction for ease of maintenance and proper alignment, return idlers used for small to midsize conveyors.

Return rails for midsize to large conveyors, hemmed covers provide strength and ensure a good moisture seal, in-line intermediate gates available in manual, electric or pneumatic options, dodge motor mounts and drive guards standard, units standard with right-hand drive.

Left-hand is optional, discharges provided with opening for optional plug switch, carry back cups required when an end discharge gate is needed, 5-degree knee section available, screw take-ups standard with tail section. Optional for head section.

Additional Literature

Learn more about Total Grain Systems

© 2024 Total Grain Systems Site by Abstract